BOWFISHING FLOATS
SAVUR OUTDOORS Bowfishing Floats give you the peace of mind that your bow is always safe while you are on the water. Our float system allows you to recover your bow from the water if it goes in unexpectedly. Weighing about 2 oz., it does not add bulk to your fishing bow, but when your bow goes overboard, simply locate the float and pull up your bow. If your bow seems to be lodged, do not pull until you break the line, you can use the float as a locator.
Learn how to reload your bowfishing floats here!!
Keep your Savur Bowfishing Float alwaysworking properly with this quick maintenance video.
Savur Mounting Bracket
WE HAVE A BRACKET!! Our new Savur Mounting Bracket is laser cut to mount your Savur Bowfishing Float to the site mount on any brand of bow. Constructed from 1/8" stainless steel, this bracket centers your Savur Float, and still allows you to stack other accessories such as Gargod Line Pullers or arrow holders. A 5/16-24 nylon lock nut and two 10-24 X 1/2" long button head screws come with it, so you can put it to work as soon as it arrives.
More Mounting options
Gargod Puller/locker
Savur Outdoors is excited to announce a partnership with Gargod Manufacturing! Their new and improved puller/locker combos come with 5/16" -24 holes for either right or left handed mounted applications to install a Savur Float directly to your puller/locker to help protect your investment. Click the Gargod Link below and it will take you directly to their product page.
​
build your own
As you can see from the gallery of photos, there are as many ways to mount a Savur Bow Fishing Float as there are to lose a bow. Savur Bow Fishing Floats are equipped with the 5/16-24 threads and ready to bolt directly into the reel mount. If a reel is in the way, or you do not wish to use our bracket or the Gargod Line puller. You can easily fabricate a small bracket to offset the Savur Bow retriever that best fits your shooting set up.
Everything you will need to fabricate the bracket can be found at your local hardware store.
Here is what you will need if you need to fabricate a bracket.
-
½” or 3/8” wide by 1/8” thick piece of flat bar stainless steel. Either size can be purchased from most local hardware stores for approximately $5 for a 3-foot-long piece.
-
A 5/16-24 threaded locking nut (lock washers will not be needed).
-
A 5/16” drill bit.
-
Tape measure.
-
Cutting tool (hack saw or cutting wheel).
-
There is no wrong way to make these brackets, just make it work for you.