Nate Cina with a 45 pound paddlefish in Montana.  G-Rex Bow,Megamouth Reel, 4 Barb TNT point, and a Savur Bow Retriever there ready to save it all when that bow goes overboard. 

Our SAVUR OUTDOORS Fishing Bow Retriever gives you the peace of mind that your bow is safe. This retrieval system allows you to recover your bow from the water if it goes in unexpectedly. Weighing about 2 oz., it does not add bulk to your fishing bow. When your bow goes overboard, simply locate the float and pull up your bow. If your bow seems to be lodged, do not pull until you break the line. You can use the float as a locator to where your bow is located.

Mounting options

OPTION 1:  As you can see from the gallery of photos, there are as many ways to mount a Savur Bow Retriever as there are to lose a bow.  Savur Bow retrievers are equipped with the 5/16-24 threads and ready to bolt directly into the reel mount.   If a reel is in the way, you can easily fabricate a small bracket to offset the Savur Bow retriever that best fits your shooting set up. 

Note:  Savur Outdoors does not provide an extension because not all bow fishing set ups require an extension. Everything you will need to fabricate the bracket can be found at your local hardware store.   

Here is what you will need if you need to fabricate a bracket.

  • ½” or 3/8” wide by 1/8” thick piece of flat bar aluminum or tin.  Either size can be purchased from most local hardware stores for approximately $5 for a 3-foot-long piece.

  • A 5/16-24 threaded locking nut (lock washers will not be needed). 

  • A 5/16” drill bit.

  • Tape measure.

  • Cutting tool (hack saw or cutting wheel). 

Gargod Line puller Threaded for Savur

 The Gargod® line puller/locker combo will attach to any RH or LH bow's sight mounting holes.  Stainless hardware is included. As with all our products, Proudly Made in the USA.  This version comes with a 5/16-24 threaded hole in the center to accommodate a Savur Bow Retriever.  The Gargod® line puller is machined from strong 6061 aluminum and features the RPM arrow locker quiver.  The line puller incorporates a 3/8" standoff which allows the arrow (once in the locker) to clear the bow's arrow rest mounting bracket. To purchase a Gargod® line puller ready for a Savur Bow retriever click the

Gargod® link below.